Showing all 9 results
-
Inverter Welder 140A 230V
£193.01Quick ViewCompact and lightweight unit weighing 5.5kg, is suitable for arc welding using the lift start method. Unit can arc weld a variety of rods including rutile, basic and stainless from ?1.6mm up to ?3.2mm. Features thermal cut-out protection. Portability allows the welder to be taken to the job at hand, ideal for the mobile technicians. Supplied with 2m 16mm? cable with electrode holder and a 2m 16mm? earth clamp and cable. Forced air cooling system with 2 fans. Optional TIG accessory kit available Model No. TIG10S.
-
Inverter Welder 160A 230V
£231.52Quick ViewCompact and lightweight unit weighing 5.5kg, is suitable for arc welding using the lift start method. Unit can arc weld a variety of rods including rutile, basic and stainless from ?1.6mm up to ?4mm. Features thermal cut-out protection. Portability allows the welder to be taken to the job at hand, ideal for the mobile technicians. Supplied with 2m 16mm? cable with electrode holder and a 2m 16mm? earth clamp and cable. Forced air cooling system with 2 fans. Optional TIG accessory kit available Model No. TIG10S.
-
Inverter Welder 180Amp 230V
£270.04Quick ViewCompact and lightweight unit weighing 6kg, is suitable for arc welding using the lift start method. Unit can arc weld a variety of rods including rutile, basic and stainless from ?1.6mm up to ?4mm. Features thermal cut-out protection. Portability allows the welder to be taken to the job at hand, ideal for the mobile technicians. Supplied with 2m 16mm? cable with electrode holder and 2m 16mm? earth clamp and cable. Forced air cooling system with 2 fans. Optional TIG accessory kit available Model No. TIG10S.
-
Inverter Welder 200Amp 230V
£308.05Quick ViewCompact and lightweight unit weighing 6kg, is suitable for arc welding using the lift start method. Unit can arc weld a variety of rods including rutile, basic and stainless from ?1.6mm up to ?5mm. Features thermal cut-out protection. Portability allows the welder to be taken to the job at hand, ideal for the mobile technicians. Supplied with 2m 25mm? cable with electrode holder and 2m 25mm? earth clamp and cable. Forced air cooling system with 2 fans. Optional TIG accessory kit available Model No. TIG10S.
-
Inverter Welder MIG, TIG & MMA 200A
£734.95Quick ViewManufactured with a pressed steel outer casing, lighter than traditional models at 20kg. Inverter technology offers many advantages over traditional transformer type welders, giving greater duty cycles and more power factor efficiency. 3-in-1 Welder uses state-of-the-art technology to achieve MIG/TIG/MMA (Arc). Suitable for arc welding a variety of rods including rutile, basic and stainless. Fan cooled DC power supply for MIG and TIG, suitable to weld steel, stainless steel, copper, nickel, titanium and their alloys. Switchable between MIG, TIG* or MMA* welding modes (*optional extra torches required). Thermal overload protection which automatically switches off when it exceeds maximum temperature. Fully functional front panel with self explanatory pictograms for each dial and switch. Wire feed control for adjusting speed of wire fed through the torch during welding. Polarity change terminals allow for MIG or flux-cored welding. Includes 3m MIG torch, earth cable, gas hose, regulator and contact tips.
-
Inverter Welder MIG, TIG & MMA 200A with LCD Screen
£1,049.95Quick ViewManufactured with a pressed steel outer casing, lighter than traditional models at 20kg. Fully functional LCD front panel with easy to follow assisted set-up. First, select type of welding, you will be advised the gas mixture and polarity recommended. Input electrode or wire thickness, completing the set-up with the material thickness, you are then ready to start welding. Up to four set-ups can be saved on the machine for fast loading. Inverter technology offers many advantages over traditional transformer type welders, giving greater duty cycles and more power factor efficiency. 3-in-1 Welder uses state-of-the-art technology to achieve MIG/TIG/MMA (Arc). Suitable for arc welding a variety of rods including rutile, basic and stainless. Fan cooled DC power supply for MIG and TIG, suitable to weld steel, stainless steel, copper, nickel, titanium and their alloys. Switchable between MIG, TIG* or MMA* welding modes (*optional extra torches required). Thermal overload warning tells you to switch off when it exceeds maximum temperature. Wire feed control for adjusting speed of wire fed through the torch during welding. Polarity change terminals allow for MIG or flux-cored welding. Includes 3m MIG torch, earth cable, gas hose, regulator and contact tips.
-
MIG Welder Inverter 160A
£503.95Quick ViewManufactured with a pressed steel outer casing, this unit is lighter than traditional models. Inverter welders offer greater duty cycles and more power factor efficiency. Fan cooled DC power supply. Welds steel, stainless steel, copper, nickel, titanium and their alloys. Can be used in gas and gasless mode. Thermal overload protection. Includes 1.8m MIG torch, 1.8m earth cable, gas hose, industrial regulator and 0.6, 0.8 and 0.9mm contact tips.
-
MIG Welder Inverter 180A
£556.45Quick ViewManufactured with a pressed steel outer casing, these units are lighter than traditional models. Inverter welders offer greater duty cycles and more power factor efficiency. Fan cooled DC power supply. Welds steel, stainless steel, copper, nickel, titanium and their alloys. Can be used in gas and gasless mode. Thermal overload protection. Includes 1.8m MIG torch, 1.8m earth cable, gas hose, industrial regulator, 0.6, 0.8 and 0.9mm contact tips.
-
TIG/MMA Inverter Welder 180A 230V
£619.45Quick ViewFan-cooled DC power supply for TIG and arc welding applications. Outer case manufactured from pressed steel with a powder coated finish for extra corrosion resistance. Digital display enables user to quickly determine which mode has been selected. Portability allows the welder to be taken to the job at hand making it ideal for the mobile technician. Features lift and high frequency starts enabling operations to start smoothly and efficiently, along with two or four touch start modes. TIG cycle features pulse TIG which includes post gas and current down-slope regulation. Supplied with TIG Accessories. Optional MMA Electrode Holder: Model No. MMA01.
