-
Professional Coil Spring Compressor Kit – Left-Hand
£224.95Suitable for MacPherson strut coil springs. Supplied with two pairs of different sized interchangeable yokes, for left-handed coil springs. Plastic yoke protectors that protect the spring coating from damage, which can invalidate the vehicle manufacturer’s guarantee. Safety yokes carefully shaped to stop the spring bowing while under compression.
-
Professional Tyre Inflator with Twin Push-On Connector
£102.34Manufactured to comply with EN 12645. Aluminium body with rubber bumper. Linear pressure scale, dual calibrated in psi and bar, with parallax correction. 0.5m flexible hose fitted with 240mm twin push-on air connector. Supplied with a serial numbered calibration certificate.
-
Qube Digital Tyre Inflator Professional with OPS & Nitrogen Purge
£524.95Robust, high reliability and modern design which is lightweight and space-saving. Touchscreen technology with human touch recognition software. Electronic pressure set with additional 4-button memory function. Three modes, inflate, deflate and over pressure setting (OPS) ? which allows operator to set the machine to automatically seat the bead on new tyres whilst getting on with alternative work. The inclusion of the nitrogen (N2) purge facility allows the unit to increase the effectiveness of this increasingly popular tyre service. Red flashing light, flashing screen and audio signal for end of cycle. Auto-start Inflation. Ceramic sensor gives guaranteed accuracy to ? 0.5% of full scale reading even with hoses up to 50m in length. 21mm Backlit transflective LCD gives a clear easy-to-read display. Supplied with a wall bracket, 5m hose with new patented design clip-on connector and 3-pin plug.
-
Rear Bush Installation Tool – Audi A3 VW Golf IV
£79.46Suitable for the in situ installation of the rear axle mounting bushes on selected VW and Audi vehicles. Use with ratchet wrench or spanner to insert composite bushes. Supplied in storage case.
-
Rear Trailing Arm Bush Tool – Fiat Panda
£53.95Suitable for removal/installation of rear trailing arm bushes on a Fiat Panda (03-12). Tool will allow changing the bushes in situ, saving time and money.
-
Reverse Action Wheel Stud Thread Restorer Kit
£28.84Unique design allows for the two halves of the thread restorer to be fitted on the good thread and wound back over the damaged thread, normally at the end of the stud. Traditional thread restorers rely on luck for the restored and undamaged threads to align. Kit contains the three most common wheel stud thread sizes. Supplied in storage case.
-
Reverse Action Wheel Stud Thread Restorer Kit – Commercial
£53.95Contains four common wheel bolt thread sizes. Suitable for cleaning and repairing damaged threads, saving time and money. Use with a 32mm socket or spanner. Supplied in storage case.
-
Shock Absorber Strut Nut Kit 18pc
£131.58Permits the removal of the top suspension nut by holding the strut piston, so it doesn?t rotate while turning the nut. The go-through design of the socket and ratchet allows the extension to pass through the middle. To be used in conjunction with a 1/2inSq drive ratchet or T-bar (not included).
-
Spoke Wrench
£7.15Specially designed spoke wrench with six different sizes. Suitable for adjusting spoke tension and removing/installing new spokes.
-
Steering Rack Knuckle Tool
£26.22Suitable for the fast and easy removal of the steering knuckle. Fits racks with hex drive, two flats and round ends. Ideal for vehicles with limited access and avoids the need to remove the rack assembly.
-
Steering Rack Knuckle Tool
£34.48Suitable for fast and easy removal of the steering knuckle. Fits racks with hex drive, two flats and round ends. Ideal for vehicles with limited access and avoids the need to remove the rack assembly.
-
Steering Rack Knuckle Tool Set 4pc
£164.95Suitable for the fast removal/installation of the steering knuckle. Designed to fit over the steering shaft onto the steering rack. Three interchangeable heads fit racks with hex drive, two flats and round ends with a diameter of 30 to 45mm.
-
Steering Tube Bearing Installer
£71.33Safe and easy way to install lower steering bearing. Includes three aluminium dies and driver bar, to be used in conjunction with a hammer (see pages XXX to XXX for our range of hammers).
-
Steering Wheel Level
£58.54Used to level the steering wheel before locking into position, prior to checking/adjusting the front wheel alignment. Ideal for use with 4-Wheel Laser Aligners such as Model No. GA70. Self-retaining and centring using a spring loaded mechanism. Features a level bubble to show horizontal position. Suitable for steering wheels with an internal diameter of between 270mm and 340mm.
-
Stud Hub Cleaner 14pc
£44.95Removes surface dirt and corrosion on hubs fitted with studs. Ideal for preparing wheels, hubs and brake discs or drums for re-assembly. Cleaning discs fit over wheel studs. Use with power drill or air impact wrench. Supplied with 1/2inSq drive adaptor. Replacement cleaning pads available, order Model No. VS8002A.
-
Suspension Strut Socket Set 24pc
£140.21Sockets manufactured from Chrome Vanadium steel. Permits the removal of the top suspension nut by holding the strut piston, so it doesn?t rotate while turning the nut. The go-through design of the socket and ratchet allows the extension to pass through the middle. To be used in conjunction with a 1/2inSq Drive ratchet or T-bar (not included).
Call us
01759 303877
