-
Clutch Alignment Tool – Land Rover
£15.47Double end tool for aligning the clutch plate when fitting the clutch cover on Land Rover vehicles.
-
Coil Spring Compressing Station Hydraulic 1500kg Capacity
£391.45Foot operated hydraulic unit. Quicker and easier than using ratchet driven spring compressor. Plastic coated yokes reduce the risk of spring slippage or damage and are suitable for springs from ?80mm to ?175mm.
-
Coil Spring Compressor Set 2pc Heavy-Duty 2500kg/Pair
£116.95Heavy-duty coil spring compressor with hardened steel body and force screw. Ensures smooth compression of spring.
-
Coil-On Plug Tester
£82.75Designed to test the COP (Coil-On Plug) on modern vehicles. Battery operated, handheld tester which quickly and easily diagnoses if a COP is producing a suitable spark to the plug. Simply place the pad on the COP while the engine is running. Features sound and visual signal recognition.
-
Combustion Leak Detector
£92.35Diagnose blown gaskets, cracked blocks and cylinder heads on both petrol and diesel vehicles. Checks for CO2 in cooling system and indicates its presence by test fluid colour change. Use with cone adaptor or in conjunction with radiator caps from Model No’s VS001, VS0011, VS0013, VS0014, VS0033 and VS006. For Test Fluid Refill order Model No. VS0061F.
-
Coolant Pump Thermostat Key – VAG
£21.55Simple-to-use tool allows easy removal and installation of thermostat without causing any unnecessary damage. For use on Audi A3 (13on), VW Golf (13on), Skoda Octavia (13on), Seat Leon (13on). Applicable Engines: 1.0 TFSi 3-cyl, 1.2 TSi, 1.4 TFSi, 1.4 FSi, 1.4 TDiCR 3-cyl. OEM Tool: T10508.
-
Cooling System & Cap Testing Kit
£242.95Capless cooling system tester uses an inflatable bladder to seal the pressure head to the radiator or header tank. Bladder system can be used on both screw and bayonet fittings and seals 90% of cars and light commercial vehicles straight out of the box. Also suitable for motorcycles, off-road and marine applications. Supplied with set of double end adaptors enabling testing of cooling system pressure caps. Supplied in storage case.
-
Cooling System Vacuum Purge & Refill Kit
£107.21Dramatically reduces cooling system refill time, without mess and without introducing air-locks. No more time consuming cooling system bleeding and no more messy spills to clean up. Simply plug into the workshop air line, attach to the cooling system header tank and create a vacuum. Complete the process by attaching the filler hose and opening the valve allowing your premixed coolant to flow into the system. Supplied with three adaptors and storage case.
-
Cordless Circuit Tester Buzzer/LED 3-28V
£18.19Suitable for testing DC circuits with voltages between 3 and 28V. No earth clips to get tangled – simply contact the wire to be tested and touch your finger on bare metal ground to get a reading. Tester illuminates LED, buzzes and vibrates on contacting live wire. Computer-safe for use around delicate engine management systems. Supplied fitted with two long-life N-sized batteries.
-
Crank Pulley Holding Tool – for Ford, Volvo 1.8, 2.0, 2.3 16v Duratec – Chain Drive
£56.65Counter-holds the crankshaft pulley while the pulley retaining bolt is loosened/tightened. Also suitable for some Volvo vehicles.
-
Crank Pulley Wrench – for Subaru, Toyota
£68.81Crank pulley wrench for the high torque required for loosening and tightening of the crankshaft pulley fixings. Compact flat handle design allows access to confined areas. Single wrench suitable for vehicle applications of two OEM wrenches.
-
Crankshaft Front Oil Seal Fitting Tool – for Ford 2.0, 2.2, 2.4, 3.2 TDCi Duratorq – Chain Drive
£62.95Essential tools required when replacing the crankshaft oil seal or timing cover. The mandrel tool is essential for centralising the timing cover during replacement to avoid premature seal failure.
-
Crankshaft Holding Tool – for GM
£97.15Crankshaft pulley holding tool suitable for a wide range of Vauxhall/Opel and some Chevrolet models. Designed to hold the crankshaft pulley whilst removing the crankshaft fixing bolts.
-
Crankshaft Holding Wrench – for GM 1.6D
£35.98Crankshaft pulley holding wrench. Suitable for Vauxhall/Opel 1.6 diesel engines.
-
Crankshaft Pulley Bolt Installation Kit – for BMW
£69.47Crankshaft holding kit for BMW N62/N73 chain drive engines. Kit contains tools to secure the crankshaft allowing the pulley securing bolt to be tightened at the correct torque. Also includes a useful socket for removing/tightening the VVT unit on the left bank on N73 engines.
-
Crankshaft Pulley Holder – for Honda
£26.95Used to counter-hold the crankshaft pulley when loosening/tightening the retaining bolt. Suitable for most Honda vehicles fitted with hydraulic PAS. Use with 1/2inSq drive breaker bar.
Call us
01759 303877